Why Should I value Log Home Maintenance?
We visit many log homes through the year. A very important factor you begin to notice is the possible lack of maintenance on many of these homes. This can be disheartening for some customers once they ask for a proposal on maintenance and be given a proposal for the restoration of their log home because the present finish was beyond maintainable condition. The truth of the situation is that might have been avoided if proper maintenance was performed consistently.
The typical maintenance cost is just about $2,500 – $3,000 bi-annually. Sometimes this price is lower and sometimes it can be higher it really depends on what the log home finish and sealants weathered over the past handful of years. Some owners may end up needing maintenance each year on select hotspots around your home in order to keep carefully the stain performing to its fullest.
What is Log Home Maintenance?
Log home maintenance is the general upkeep on a log shell to ensure there is proper protection from damaging UV radiation, water damage, air infiltration, and insect and rodent intrusion. Maintenance also ensures the log cabin looks the way it did the first day it had been finished.
One element of maintenance that really helps to give the life span of stains and sealants is a yearly wash of your log home. This removes any surface contaminants such as for instance dust, pollen, bird feces, and insect remains (webs, egg sacs, skeletons, etc.) that’ll wear the final prematurely. Washing your home is also a good time to discover any regions of failed caulking or chinking and provide an overall assessment of the problem of the log home stain to get a notion of what walls or areas require a maintenance coat of stain.
An effective way to assess the problem of a log home finish is to attend for the building to dry after being washed. Once dry you have to understand what type of log home stain is in your building ремонт на входове и стълбища. If you have a gas based stain you ought to be considering the knots and checks on the walls. These areas will turn blonde when the final is wearing off and this indicates that you ought to apply one to two maintenance coats of stain. Some oil based stains now give you a clear maintenance coat and here is the better path to take however it only works if the stain isn’t worn to bare wood.
If you have a waterborne latex based stain in your building you ought to be considering the glossiness of the finish. Once the final is dull you must apply an obvious maintenance coat to these areas.
When caulking or chinking is failed or failing across the building you must mark these spots out and take away the bad regions of caulking or chinking with a blade or razor. This can allow the location behind the sealant to properly dry up since moisture was almost certainly the reason why the sealant isn’t staying with the logs. Once dry apply backer rod to the log joint and apply caulk or chink to the location making sure to complement the present caulking or chinking line. This should be achieved before applying the maintenance coat of stain unless you have white chinking.