In a previous article we focused on the main items to look out for when buying LED Strip Lights for the initial time. Now we are likely to get you through another phase; installation. Installing your LED Strips can be anything from very easy to very difficult, but ultimately it all hangs about what final result you are trying to achieve along with your lighting system. For instance, introducing a 1 metre strip of LED lighting into your kitchen cabinet can be a lot more straight forward than using 20 metres of RGB LED Strip Lights to outfit a team and run this on DMX Control. Regardless of what you do there are always a few universal items to look out for and this informative article will get you through a few of them.
We will focus on the LED Tape itself. This includes a long piece of high impact, flexible circuit board with surface mounted devices, or SMDs, positioned along its length. There are always a few different items to consider here including, LEDs per metre, LED chip size, strip light colour and length. Strip Lights can be found in two LED per metre varieties, 30 LED per metre and 60 LED per metre. As suggested by the name the latter has two times as many LEDs and will be a lot brighter than the former LED Strip lights uk. They are designed to be used in a lighting context where they’re forced to contend with background illumination. So for instance if you want to utilize them in a daylight setting, such as a shop street display, or add them to a room that already has general illumination and still want them to be viewed, you should choose 60 LED per metre as their sharper light output makes them ideal for these purposes. Besides this a 30 LED per metre strip will have the ability to handle almost every other lighting arrangements, such as club setups, or elsewhere they don’t need to contend with background lighting.
Whenever you consider the specifications of strip lighting you will often notice a series of four numbers that to most people mightn’t mean a lot. These actually make reference to how big the patient LEDs on the strips. Typically you will discover chip sizes of either 5050 (5mm by 5mm) or 3528 (3.5mm by 2.8mm). The main element difference between those two forms of chip size may be the consistency of light they produce. Smaller LEDs can create an even more jagged and inconsistent effect, while larger LEDs provides an even more even spread of light.
Another decision to create is precisely what colour strip light you want to buy. They are usually available in three main colour varieties, including warm and cool white and interchangeable RGB. The former two are for adding stylish ambient lighting to commercial and domestic settings while avoiding being too garish with the end result. They may be used to aesthetically to enhance the appearance of a room with the addition of layered or accent lighting, or they could add functionality to kitchens, bathrooms or offices where they may be used as task lighting to aid work. RGB LED is really a direct replacement old fashioned disco lighting and offers tens and thousands of programmable effects. Typically they will run directly from a handheld remote control which works in conjunction with a red eye sensor attached involving the strip light and transformer. However, DMX Control is also an option. This can be a type of advanced effects programming that uses an industry standard signal to control the brightness, colour and frequency of the lights.
Probably the most obvious consideration to create is the exact length of strip lighting that you require. This depends on the type of your setup and how complex your intentions are. Usually most lighting arrangements can be performed with an individual strip. Strip Lights can be found in 5 metre and 10 metre reels as standard, but longer or shorter bespoke lengths can be ordered so call your provider to get out. Lengthening or shortening strip lighting can be achieved all all on your own as well. To shorten a strip light can be achieved by cutting the strip at one of its cutting points spaced approximately 5cm apart along the size of the light. To add two pieces of strip together, and thereby increase the size of the light, you will be needing a soldering iron and some two core wire. Simply solder these wires with their respective plus and minus solder points at the conclusion of the strip light where the cut has been made and do the same on one other strip to accomplish the connection. This method may be used to achieve a little extra length, especially when trailing them around a large corner.
This informative article has given you a few of the main specifications associated with LED Strip Lighting and how to make certain you obtain exactly the right light you wish for your purposes. Be aware of additional articles on how best to be sure you meet the ability requirements of your lighting system.