The best way to Take full advantage of Ones Air Conditioning Service

When you turn on your air con on the first hot day of the year it can be frustrating to locate that your unit is struggling to cool the space, or worse, not working at all. While it’s recommended you receive an expert engineer to perform an air conditioning service as part of your yearly property maintenance, additionally there are several simple checks that you can do in between to keep your air con running smoothly.

Keep your air con unit clean

Most air con faults are caused by lack of cleanliness, but just dusting the vents regularly will make a big difference to living of your unit. ac installation st cloud fl Another simple thing you can do to enhance the hygiene of your air con system is to eliminate the filters, spray them down with antibacterial spray and rinse with warm water. The cleaner you keep your unit, the less often you’ll have to have an air conditioning service.

Change or clean the filter

The reason why your air con system includes a filter is both to safeguard the mechanics inside, along with keeping the air clean as part of your home or office. If this filter isn’t kept clean you’re making your air con system work harder and less efficiently, meaning your time bill will soon be higher and your yearly air con service may possibly not be sufficient to keep your unit in good health. Some air con filters have to be cleaned rather than replaced and vice versa. An electrostatic filter is cleaned, while a disposable fibreglass or paper filter must certanly be replaced fairly regularly; between once per month and twice a year, depending on the quality of air in your area. Check it regularly to find out how often you ought to be changing yours. A filter which needs changing can look clogged with dust.

Make sure the condensing unit isn’t obstructed

The condensing unit may be the part of your air con system that sits outside and pulls the air in. If this becomes obstructed by weeds, dead leaves as well as outdoor furniture you’ve stored against it, your air con might not work along with it could do. Make cleaning the location around the machine part of your regular property maintenance. It’s also good to achieve this before an air conditioning service, to avoid being charged by the engineer for time spent cleaning, and also to avoid misdiagnosis of why your unit isn’t working properly.

Check airflow on inside and outside unit

Once you’ve removed any obstructions from the condensing unit, check that the airflow is powerful and consistent on both units. If the airflow is poor this can indicate that your air con system includes a blocked coil or an a failure fan. In most cases it will soon be necessary to call an expert air con engineer to investigate the situation and supply a solution.

Switch between heating and cooling modes

It’s recommended to do a DIY air con service when it is a huge while since you’d used your air con system. One very easy thing you can do is to use switching involving the cooling and heating modes. If your air con is stuck on a single setting, it normally indicates that there is a problem with the reversing valve. If this happens you should call in an expert engineer.

Repair any rust or corrosion

Check over your air con system, particularly the outdoor unit, for just about any signs of rust or corrosion. If the damage is minimal, you can usually repair it by painting over it with waterproof steel paint. If the rust or corrosion is more severe you should call in a house maintenance professional. Ask your engineer to check for signs of oxidation while completing your air con service.

Leave a Reply

Your email address will not be published. Required fields are marked *