Interlock Armored Fibre Optic AS CONTRASTED WITH Innerduct and even Customary Fiber Cabling

Installing of a fiber optic cabling system can be a great addition to your network infrastructure. One of the most crucial items to consider when beginning this work is the technique by which to safeguard the delicate fiber optic cable from potentially harmful environmental variables. Commonly, an innerduct is used to accommodate and protect the cable. The innerduct is really a corrugated HDPE tube that surrounds the cable, acting as a shield for damage and reinforcing the bend radius of the cable. While this process is incredibly effective in the protection of your cable, it can be a far more time consuming task. This is because the innerduct must first be installed throughout the facility that the fiber cable will be going into. Once the innerduct is fully installed, it’s then time to set up the fiber optic cable.

The fiber optic cable is pulled through the innerduct, installed and terminated as usual. In conclusion this technique, you’re basically performing two installations: the installation for the fiber optic cable and the installation for the protective innerduct. Although innerduct is a good, reliable investment for cable protection, the aforementioned mentioned factors can equate to raised installation costs. Not just do you spend more for the physical innerduct material, the full time it will take to set up the innerduct also presents additional time and labor costs. Installation fibre optique  Wouldn’t it be easier and less expensive if the optic cable might be installed having its own built in protective shield? Well what’s promising could it be can be. Armored fiber optic cable can be acquired alternatively to having an innerduct. With armored fiber, there is no need for multiple construction processes. The armored fiber is made with multiple layers of protection and extra reinforcing in the cable housing to stop damage. Armored fiber cable offers:

Basically, armored fiber cable retains just as much protection reliability as having an innerduct, but also for potentially less money and construction time. However, every rose has its thorn, by choosing to use armored fiber you might be saving time and money, but certain sacrifices must certanly be made as well. Whenever you install an innerduct, one of the main benefits is that it’s a cabling pathway and could be reused should you need to replace the cable or add new fiber capacity.If the innerduct has not reached its fill ratio, the extra space left within the innerduct permits another cable to be tell you the prevailing innerduct thereby maximizing your investment. Should you should do the same with armored cable, you’ll incur the cost of having to get and install new armored cable, which is more costly than standard fiber optic cable.

Important items to consider:

It is important to think about this when creating the decision on whether to go with armored fiber cable or innerduct. While both are excellent ways of cable protection, it is vital to analyze your fiber cabling needs for both the present and the long run, and make your option based on which your specific requirements are, ensuring to policy for potential changes that’ll occur involving your fiber optic network infrastructure.

Xetra Networks Inc. is really a San Diego Low Voltage and General Building contractor that designs and installs telecom solutions. We specialize in voice cabling, data cabling, fiber optic cabling, VOIP, wireless, computer rooms, server rooms, and surveillance systems in San Diego, as well as the whole southern California Region.

Leave a Reply

Your email address will not be published. Required fields are marked *